Description
DJI FlyCart 30 max.240m high
Tethered Drone System
MYUAV System Model：FC30X
Versions：V02
Date：2024-04-10
1. Brief introduction
1. FC30 UAV long endurance hovering
Ground station continuously provides drone-power electricity for 8~24 hours of hovering which enables works can last long.
2. Multiple ways to supply power
25kw max. 380V industrial power supply, generator power supply.
3. High security
Installation replacing one of the original battery packs. If emergency, the backup battery pack can immediately take over the power supply.
2. System composition
1. FlyCart 30 DJI drone
2. Payload system
3. FC30X Onboard Power Supply together with Tethered Base Station
4. 380V min.25kw power by customers
3. Detailed parameters
n DJI Drone
DJI FC30 drone, parameters and configurations are detailed on the DJI website
https://www.dji.com/uk/flycart-30
n Tethered system
Integrated Ground Tethered Base Station
Performance indicators
1.1. Environmental characteristics
Project | Technical Parameters |
Working Temperatures | -20～45℃ |
Storage Temperatures | -40～65℃ |
Altitude | ≤2000m |
1.2. Technical parameter
Project | Technical Parameters | |
Tethered station | Input voltage | AC 380v±10%，3-phase system |
Output voltages | Rated DC 1000v | |
Output power | Rated 22kw MAX.30kw | |
Take-up speed | 0～3m/s adjustable | |
Size | L×w×h: External dimensions size 68.6x44.8x49.2cm | |
Weight | 60kg(including tethered cables) | |
Material | Aviation aluminum alloy | |
Display System | LCD display showing voltage, current, temperature, cable length | |
Protection Level | Minimum IP 54 | |
Tethered cable | Operating current | Max.22A |
Tensile strength | ≥300kg | |
Cable length | Regular 110m Max.240m | |
Onboard power supply | Input voltage | DC 1000v |
Output voltages | DC 56v constant regulated output & accuracy ±1% | |
Output power | 20kw（rated long-time power） | |
Size | L×w×h：311×140×379mm as original battery pack | |
Weight | 6.5kg | |
Installation | Replacement of one fc30 drone battery, plug and play | |
Protective function | In tethered power mode, the vehicle can fly and land normally if the power supply is interrupted during flight. | |
Conversion Efficiency | Minimum 96% | |
Input and Output Connectors | Plug/Play connectors with reverse polarity protection, 45A input/output for RRU, 300A for Drone | |
Cooling Method | Natural cooling with forced fan | |
Cooling System | Fan cooling system | |
Output Standard | Optical output designed for compatibility with RRU | |
Safety
Cable Insulation Resistance | 100MΩ at 20°C |
Dielectric Strength | Withstands at least 3000V DC for 1 minute |
Operating Environment | Operational range: 0÷50°C |
Dielectric Strength | Hybrid cable: withstands 3500V DC for 1 min, Converter: withstands 3000V DC |
Insulation Resistance | Hybrid cable: Minimum 500MΩ at 20°C, Converter: Minimum 100MΩ at 20°C |
Payload
4. Equipment Operation Procedure
1. Check that the equipment is complete: Check that the main body of the drone, the cleaning device, the control system and the guards are intact.
2. Install the cleaning device: Install the cleaning device to the main body of the drone and make sure it is firmly connected.
3. Connect the power supply: Connect the battery to the remote control and turn on the power switch.
4. Control the drone flight: Use the remote control to control the drone flight, adjust the flight height, speed and direction as needed.
5. Start cleaning: After determining the cleaning object, switch on the cleaning pump and use the drone to clean the target.
5. Equipment Maintenance
Daily maintenance: after each use, the main body of the drone and the cleaning device should be cleaned to keep the equipment clean and tidy. At the same time, check whether there is any damage or looseness of the parts and deal with them in time.
Regular Maintenance: It is recommended to carry out a comprehensive equipment inspection and maintenance once a month, including replacing worn parts and cleaning the internal circuit boards.
6. Principles of use
1. When in use, the power supply should maintain good ventilation and heat dissipation; the air passage of the module unit should not be blocked;
2. The power supply should be used under the environmental conditions specified in the specification;
3. Do not adjust the potentiometer in the power supply at will;
4. Do not operate in the presence of volatile gases or flammable environments;
5. Do not remove the outer cover or touch the internal parts under any circumstances;
6. For safety reasons, do not perform internal warranty or parts replacement alone;
7. The power supply must be safely insulated when in use, and any side of it must be at least 8mm away from the outer metal shell; if it is less than 8mm, a PVC sheet with a thickness of more than 1mm must be used to strengthen the insulation;
8. If you notice smoke or unpleasant odor during startup or use, turn off the power immediately.
7. Warranty
The warranty period for this product is 1 year. During the warranty period, any natural damage under normal use will be repaired free of charge by our company;
However, if any of the following conditions occur, the warranty will not apply:
1. Damage caused by unauthorized repair without the permission of the company;
2. Any addition or modification;
3. Improper operation or use;
4. Abnormal environmental conditions, exceeding specification requirements, causing damage;
5. Deliberate human damage;
6. Damage caused by force majeure natural disasters.
8. Repair scope
If the power supply fails to operate normally during the warranty period due to errors in materials or manufacturing technology, our company will provide free repair or replacement. The repair service will include various labor services and any necessary adjustments or replacement parts.
9. Restrictions
1. If you fail to pack the product in the same way as when you send it back and it is damaged during transportation, the warranty will also be void.
2. Our company will not be responsible for any of the following:
l Damage caused by fire, earthquake, riot, war, terrorist attack, third party's behavior and other events;
l Damage caused by the customer's intentional or negligent act, misuse, or use under other abnormal conditions;
l Incidental damages arising from the use or performance of this product [interruption of business, loss of business profits (including loss of use of equipment, costs of replacing any equipment, devices or services, or claims by your customers)];
l Any damage caused by using the method other than that specified in this manual;
l Regardless of any circumstances, such as operation, cleaning or maintenance, please be sure to comply with the safety rules stipulated in Item 7. If you violate them and cause safety concerns beyond the original design and manufacturing, our company will not be responsible.
Message
