With the development of technology, drone technology is gradually penetrating into various industries, especially in the field of aerial work. One of the innovations in this field is the FC30X drone from MYUAV, which is designed for high-altitude cleaning operations with the aim of improving efficiency, reducing costs, and safeguarding the safety of operators.

In this paper, we will analyse the MYUAV FC30X drone for aerial cleaning operations in comparison with traditional aerial wall cleaning operations.

●Security

1.FC30X drone :

High safety: UAV operation eliminates the need for personnel to physically ascend to high altitudes, greatly reducing the risk of safety accidents such as falling from heights.

Strong environmental adaptability: The design of FC30 has fully considered the key factor of hovering stability. Whether in a strong wind environment or facing complex building structures, it can maintain a stable hovering state, ensuring the smooth progress of cleaning work.

2.Traditional manual overhead cleaning：

Higher risk: Operators need to use tools such as hanging baskets or climbing ladders to reach the high altitude position, which poses a higher safety risk.

Highly affected by the environment: external wall cleaning must be carried out in good weather conditions, the wind should be less than level 4, and work should stop above level 4. Therefore, the wind force should be measured before work, especially the wind force at high altitude. In addition, conditions such as rain, snow, fog, poor visibility, as well as high temperatures (above 35°C) and low temperatures (below O°C) are unsuitable for façade cleaning.

●Efficiency and cost

1.FC30X drone：

Higher efficiency: The MYUAV FC30 cleaning tethered drone is able to work continuously for up to 8 hours under the state of continuous water supply due to the ground water supply and power supply programme, and the working area can reach 10,000 sq. ft. a day, and the cleaning task can be completed in only 1 day.

Low long-term cost: Although the initial investment is relatively high, the overall cost is lower in the long run due to the reduction of manpower cost and the improvement of work efficiency.

2.Traditional manual overhead cleaning：

Lower efficiency: under the same cleaning requirements, for a curtain wall of about 10,000 square metres, traditional manual cleaning will take a week to complete.

Higher cost: in addition to the manpower cost, it is also necessary to consider the equipment rental cost and the additional insurance cost that may arise.

●Cleaning effect

1.FC30X drone：

Good cleaning effect: one of the biggest highlights of the MYUAV FC30 series of residual cleaning drones is its high pressure output of up to 23.5Mpa. By precisely controlling the angle and pressure of the nozzle, it is able to achieve the ideal cleaning effect, and it can also effectively clean some hard-to-reach parts of the building.

Strong flexibility: it can be adjusted according to the specific conditions of the building to ensure that every corner can be thoroughly cleaned.

2.Traditional manual overhead cleaning：

Cleaning effect depends on people: the effect depends largely on the experience and skill level of the operator.

Greater limitations: For some special structures or narrow spaces, manual operation may be difficult.

●Environmental friendliness

1.FC30 drone：

Eco-friendly and energy-saving: MYUAV FC30X is powered by eco-friendly cleaning agents and electricity, which reduces the consumption of fossil fuels and helps reduce carbon emissions.

Less noise: Compared with traditional cleaning equipment, the drone generates less noise when running, reducing the impact on the surrounding environment.

2.Traditional manual overhead cleaning：

Potential for more pollution: the use of equipment such as high-pressure water cannons can result in wasted water, as well as more noise from the operation of the equipment.

The FC30X drone from MYUAV has demonstrated obvious advantages in high-altitude cleaning operations of external walls, and is superior to traditional manual high-altitude cleaning methods in terms of safety, efficiency, cost and environmental protection. With the continuous progress of technology and the gradual decrease of cost, it is expected that the application of drones in the field of aerial work will become more and more extensive in the future.

--DRONE SOLUTION PROVIDER--

MYUAV TECHNOLOGIES CO.,LTD.

Tax No.:91320118MA275YW43M LegalRegister No.:320125000443821

Add:No.89，Pingliang Street，Jianye District, Nanjing,China 210019

M:MYUAV@MYUAV.com.cn T:+86 25 6952 1609 W:en.MYUAV.com.cn

[Caution]MYUAV is a manufacturer of defense products and is under security management by a state agency.